Description
Direction for use:
- Ensure all surfaces are clean, dry, and grease free. Remove all grit, oil, grease, detergents, flaking, paint, oil sealant, and any loose materials.
- Cut the tip of the nozzle and cartridge Screw the nozzle onto the cartridge.
- Fit into a caulking gun, and apply on the surface in a steady flow
- If required smoothen and shape the sealant With a spatula dipped in a mild detergent.
- Remove excess uncured sealant with a Mineral turpentine soaked cloth Fully cured excess sealant can be removed by trimming it with a sharp knife.
There are no reviews yet.